Technika SH-A366 - Setup Menu

EN-59
Setup Menu
This feature allows you to set up the default settings by preference for using your
camera.
1. Rotate the mode dial to L (Setup) mode and turn your camera on.
2. Press
W, then use x or y to select the [Set-up1] / [Set-up2] / [Set-up3] menu.
3. Use v or w to select the desired option item, then press the e button.
4. To exit from the setup menu, rotate the mode dial to other desired mode again.
 [Set-up1] settings
Item Functional Description
Format
x
Erases all images and reformats the SD card loaded in your
camera. Protected images are also erased. SD card cannot be
formatted if it is write-protected.
Refer to the section in this manual titled “Formatting an SD
Memory Card or Internal Memory” for further details.
•Yes / No
Beeper This sets whether or not to mute the startup sound, and the
camera sound each time you press a camera button.
•On / Off
Date & Time
z
This sets the date and the time.
Refer to the section in this manual titled ”Setting the Date and
Time” for further details.
Language
B
Sets the language that is displayed on the LCD monitor.
Refer to the section in this manual titled “Choosing the Screen
Language” for further details.
x
z
B
x
z
B
Set-up2
Set-up2
Set-up1
Set-up1
Format
Format
Beeper
Beeper
Date & Time
Date & Time
Language
Language
Off
Off
y/m/d
y / m / d
English
English
Off
y/m/d
English
Set-up3
Set-up3
Set-up2
Format
Beeper
Date & Time
Language
Set-up3Set-up1
C
r
u
C
r
u
Set-up2
Set-up2
Set-up2Set-up1
Set-up1
Set-up1
TV
TV
LCD Brightness
LCD Brightness
Auto Shut Down
Auto Shut Down
Reset Number
Reset Number
PAL
PAL
0
2 Min.
2 Min.
TV
LCD Brightness
Auto Shut Down
Reset Number
PAL
0
2 Min.
Set-up3
Set-up3
Set-up3
t
E
t
E
Set-up2
Set-up2
Set-up1
Set-up1
Set-up1
Set To Default
Set To Default
Version
Version
Set To Default
Version
Set-up3
Set-up3
Set-up3Set-up2