TechniSat Digit ISIO S2 User Manual

30
7.3.4 Calling up blocked channels
If a programme is selected that is blocked by the parental control function, the message
Device PIN will be displayed on the screen.
> Use the numeric keys to enter your PIN code.
The channel you want will be displayed.
or
> Change to an unblocked channel as described in section 8.4.
If global parental control is enabled, the device PIN code will be requested again when
the blocked channel is switched on. To make things easier for you, you only need enter
the PIN code once during each operating phase.
When doing so pay careful attention to the information and settings for global and user-
dependent parental control (TechniFamily) under section 15.2.
If the blocked channel involves an encrypted broadcaster, please refer to section 8.5.3
as well.
7.3.5 Return to last channel selected
> Press the Back button on the remote control to return to the last channel selected.
> Press the button again to return to the channel you were previously watching.
7.3.6 TV/Radio switchover
> You can use the TV/Radio button to switch between TV and radio mode.
The television switches to the last radio programme listened to.
Alternatively you can also switch between TV and radio mode as described under
sections 8.4 and 8.17.
To do this also note the setting for OSD Radio/Music in section 7.7.1.4.
7.3.7 Infobox
Each time the channel is changed, an infobox appears on the screen for the period of time
set in section 7.7.1.3.
You can also access this manually by pressing the Info button on the remote control.
This Infobox displays the location and name of the selected channel, the title of the current
programme and the currently active channel list.

TechniSat Digit ISIO S2 Specifications

General

Signal source	Satellite
Digital signal format system	DVB-S, DVB-S2
Personal Video Recorder (PVR) included	-
Tuner type	Digital
Product color	Silver
Number of tuners	2 tuner(s)
Channels quantity	10000 channels
Audio output channels	- channels
Favorite list TV programs	10000
Digital Satellite Equipment Control (DiSEqC)	1.0, 1.2, Sat-CR
Audio formats supported	FLAC, M4A, MP2, MP3, OGG, WAV
Image formats supported	BMP, GIF, JPG, PNG, TIF
Video formats supported	ASF, AVI, H.264, MKV, MOV, MP4, MPEG1, MPEG2, MPEG4, MPG, TS, TS4, VOB, WMV
Built-in HDD	No
USB 2.0 ports quantity	3
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	0
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.2 W
Power consumption (typical)	13 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 75 %
Display type	VFD