TechniSat DIGITRADIO 230 OD

113
DE
EN
FR
IT
NL
NO
PL
SK
DK
CZ
To unpair a paired device, hold down the Play buon. [Not Connected] appears
on the display and the DIGITRADIO returns to pairing mode.
10 AUX input
Music on external playback devices such as smartphones/tablets that do not have
Bluetooth can be played back via the AUX input.
> Open the protective cover with the AUX label on the rear of the DIGITRADIO
230 OD.
> Connect the external device to the AUX input using a 3.5 mm jack cable (not
included with delivery).
> Press the MODE buon as oen as required until [AUX] appears on the display.
> Play music on an external playback device.
> The volume can be adjusted using the volume control knob, or using the volume
control on your external playback device.
Do not set the volume on the external playback device too low, otherwise
background noise may occur.