TechniSat DIGITRADIO 230 OD

93
DE
EN
FR
IT
NL
NO
PL
SK
DK
CZ
5.3 Preparing the DIGITRADIO 230 OD for operation
5.3.1 Charge the baery and connect to the mains power supply.
When used for the first time, the rechargeable baery must be connected and fully
charged. Please refer to the information in Section 5.3.1.1.
> Insert the mains cable into a socket.
> The DIGITRADIO starts and runs an initial scan for stations in your area via DAB+.
Ensure that the antenna is correctly aligned as per Section 5.3.2.
> Once the station search has successfully completed, the first DAB station on
the station list is played. The charge status of the baery can be shown on the
display by pressing the INFO buon multiple times.
Baery charging - Baery is charging
Baery charged - Baery is fully charged.
The baery is charged as soon as the device is connected to the mains. The
charge status can be viewed via the display.
Replace a rechargeable baery that is weak in good time or recharge it.