124
11.7 Factory seings
If you change the location of the device, it is possible that the saved stations can no
longer be received. In this case you can reset the device to factory seings to delete all
the saved stations and then launch a new scan.
> Press the MENU buon and use the TUNE/SCAN knob to select the [System] >
[Factory Seings] option.
> Use the TUNE/SCAN knob to select the [Yes] item to reset the factory seings
and press the TUNE/SCAN knob.
All previously stored stations and seings will now be deleted. The device is now
in the same status as when delivered.
> [Restarting...] appears on the display. Following this, the device automatically
performs a complete scan in DAB mode. While scanning, the display information
shows the progress, as well as the number of digital radio stations detected.
Aer completing the station scan the first DAB+ channel is played.
To Next Page
Loading...