117
DE
EN
FR
IT
NL
NO
PL
SK
DK
CZ
> If you want to activate the alarm now, select On and press the TUNE/SCAN knob
again. The alarm is now activated.
A clock icon appears on the display if an alarm is active.
Please note that the alarm only works in the mains power mode. The alarm does
not start in baery mode due to the power save function. However, it can be set
and activated.
11.2.2 Switching o the alarm aer being woken
> Press the ON/OFF buon to switch the alarm o.
> Press the TUNE/SCAN knob to switch on the Snooze function. By pressing the
TUNE/SCAN knob again, you can select the length of the pause as either 5 or 10
minutes. Aer the snooze time has elapsed, the wake-up tone starts again.
To Next Page
Loading...