EasyManuals Logo

TechniSat TechniStar S2 Quick Start Manual

TechniSat TechniStar S2
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
12
Screen format
> Use the right/left arrow keys to set the screen format for the connected TV.
The screen format on the TV will be automatically adjusted according to your selection.
> Press the green function key Accept to confirm the selection and move on to the
next installation step.
If either Belgium, Netherlands or Luxembourg has been selected in the country
selection, you are then taken to the programme provider selection. Otherwise the
installation continues with selecting the antenna signals.
Selecting the programme provider
> Use the arrow buttons to highlight the Subscription option.
> Press the OK button to open a window with the available programme providers.
> Use the up/down arrow buttons to select the programme provider you want.
> Press the OK button to close the window again.
> Use the arrow buttons to highlight the SD/HD option.
> Press the OK button to open a window where you can select from the HD and SD
entries.
> Use the up/down arrow buttons to select the entry you want.
By selecting HD both HD and SD channels will be scanned and stored in future scans.
By selecting SD only SD channels will be scanned.

Other manuals for TechniSat TechniStar S2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TechniSat TechniStar S2 and is the answer not in the manual?

TechniSat TechniStar S2 Specifications

General IconGeneral
Audio output channels- channels
Power output per channel (20-20KHz@8 Ohm)- W
PC in (D-Sub)No
USB ports quantity3
S-Video inputs quantity0
Ethernet LAN (RJ-45) ports1
Connectivity technologyWired
Speakers connectivity type-
Audio formats supportedMP2, MP3
Image formats supportedJPG
Video formats supportedTS, VOB
Ethernet LANYes
Product colorBlack
Audio decodersDolby Digital Plus
Input frequency range950 - 2150 MHz
Video compression formatsMPEG2
Apple docking compatibilityNot supported
On Screen Display (OSD) languagesDEU, DUT, ENG, ESP, FRE, GRE, HUN, ITA, POL, POR, RUS, SWE, TUR
AC input frequency50 Hz
Power consumption (standby)0.5 W
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)10 - 75 %
Package weight1600 g
Weight and Dimensions IconWeight and Dimensions
Depth135 mm
Width280 mm
Height37 mm
Weight600 g

Related product manuals