Techno CNC Systems 60120 - Page 27

27
Call: 1-631-648-7481 or Visit: support.technocnc.com
Titan Series WinCNC Manual
WinCNC
WinCNC Controller
WinCNC Users Guide Page 20
Shortcut Keys continued
Tool Bar Shortcuts
ESC Aborts the current le or command
SPACE Pauses a le or command
ENTER Starts/restarts a le or command
TAB Opens the command history box
CTRL+R Opens the restart le box
Feed Rate Override Shortcuts
INSERT Increases override rate
DELETE Decreases override rate
CTRL+either Resets feed rate to 100%. No over-
ride settings
Manual Digitize Shortcuts
After opening the Manual Digitize toolbar and clicking the green
start button, the following shortcut key combinations become active
for adding moves to the digitized le.
Add Rapid Move CTRL+J
Add Feed Move CTRL+F
Add Arc Midpoint/Endpoint CTRL+A
Undo Last Move CTRL+U
Close Current Shape CTRL+D
Save CTRL+W
Spindle Speed and Laser Power Shortcuts
Spindle Speed Alone or
Laser Power Alone
+ - (plus and minus)
Spindle Speed and Laser
Power Together
Laser Power uses + -
Spindle Speed uses Shift + -
CTRL+(Function Key) See “ctrlf#=” in conguration settings
Program Operation