Techno CNC Systems 60120 - Techno CNC Software Controller Overview

15
Call: 1-631-648-7481 or Visit: support.technocnc.com
Titan Series WinCNC Manual
WinCNC
2.3 Techno CNC Software Controller: Overview
The Techno CNC Controller has advanced features to provide the
smoothest possible cuts. G-Code input is constantly buffered to
‘vector match’ moves. This means your machine only slows down
when it needs to and then only as much as needed to stay within the
acceleration parameters programmed. The Techno CNC Controller
also does S-Curve acceleration through arcs and matches arc
tangential velocities with straight moves to provide smooth arc
moves. The result of these features is simply smoother cuts and less
needfornishingoperations.TheTechnoCNCControllerhasahighly
customizable, user-friendly interface that lets you take control of
your machine, providing features previously only found on custom
industrial controllers.
The intuitive user interface is easy to learn and convenient to use. All
the features you need and expect are readily accessible via industry
standard G-Codes. Simple keystrokes provide the ability to start,
pause, restart, jog, and rapid transit any axis without navigating
multiple screens and windows. Programs may be run from any line
as needed. The programmed feed rates may be adjusted from 1% to
200% without stopping machine motion.