Technogym Skillmill - Page 50

6.3.2.3 SETTING THE FACILITY URL
Command Notes
Command @SFACILITYURL fc# Sets the facility URL of the equipment.
Table 31
The parameter fc indicates the name of the facility URL of the equipment.
6.3.2.4 VIEWING THE FACILITY URL
Command Notes
Command @RFACILITYURL# Prints the facility URL of the equipment.
Table 32
6.3.2.5 WRITING THE LOW KIT SERIAL NUMBER
Command Notes
Command @SLOWKITSN sn# Sets the Low Kit serial number.
Table 33
The sn parameter indicates the Low Kitserialnumber.Itmusthavealengthof16characters.
6.3.2.6 READING THE LOW KIT SERIAL NUMBER
Command Notes
Command @RLOWKITSN# Displays the Low Kit serial number.
Table 34
6.3.2.7 READING THE MAC ADDRESS
Command Notes
Command @RWIFIMAC# Displays the Wi-Fi module Mac address.
Table 35
Skillmill
Technical Service Guide - Rev. 3.5
Page50
email: support@technogym.com