Technogym Skillmill - Page 59

6.4.1 CONFIGURING THE SKILLMILL CLASS
6.4.1.1 SCENARIO WITH SKILLMILL CONNECTED TO UNITY SELF AND THE CLOUD
If the console is connected to the Cloud and Unity Self, the Facility MUST BE set on Unity
Self.
1. Check that the minimum Skillmill installation requisites are respected (for the details, refer to
the Minimum Installation Requisites document available on Technogym Direct).
2. CongureUnitySelfwithastatic IP. Memorise the Unity Self IP address, as it will be needed
whenconguringtheconsole.
3. Download and open the “Equipment Set-up” app, available for Android and IOS mobile
devices.


4. andfortheconnectionwithUnitySelf(seing
on the Technogym Equipment Set-up app, plus activation of the console to store the data).
5. Check the Skillmill app is installed on the Unity Self dashboard, through the Technogym app
store professional application pro.mywellness.com/store.
6. Check that the room where the Skillmill lesson will be delivered has been set via the pro.
mywellness.com site (Planner section).
Skillmill:
Technical Service Guide - Rev. 3.5
Page59email: support@technogym.com