© Technosoft 2011 III
IDMx40 Technical Reference
TML_LIB_LabVIEW v2.0 (part no. P091.040.LABVIEW.v20.UM.xxxx) – explains how to
program in LabVIEW a motion application for the Technosoft intelligent drives using
TML_LIB_Labview v2.0 motion control library for PCs. The TML_Lib_LabVIEW
includes over 40 ready-to-run examples.
TML_LIB_S7 (part no. P091.040.S7.UM.xxxx) – explains how to program in a PLC
Siemens series S7-300 or S7-400 a motion application for the Technosoft
intelligent drives using TML_LIB_S7 motion control library. The TML_LIB_S7 library
is IEC61131-3 compatible.
TML_LIB_CJ1 (part no. P091.040.CJ1.UM.xxxx) – explains how to program a PLC
Omron series CJ1 a motion application for the Technosoft intelligent drives using
TML_LIB_CJ1 motion control library. The TML_LIB_CJ1 library is IEC61131-3
compatible.
TML_LIB_X20 (part no. P091.040.X20.UM.xxxx) – explains how to program a PLC B&R
series X20 a motion application for the Technosoft intelligent drives using
TML_LIB_X20 motion control library. The TML_LIB_X20 library is IEC61131-3
compatible.
TechnoCAN (part no. P091.063.TechnoCAN.UM.xxxx) – presents TechnoCAN protocol
– an extension of the CANopen communication profile used for TML commands
If you Need Assistance …
If you want to … Contact Technosoft at …
Visit Technosoft online
World Wide Web: http://www.technosoftmotion.com/
Receive general information
or assistance
Ask questions about product
operation or report suspected
problems
Make suggestions about,
or report errors in
documentation
World Wide Web: http://www.technosoftmotion.com/
Email: contact@technosoftmotion.com
Fax: (41) 32 732 55 04
Email: hotline@technosoftmotion.com
Mail: Technosoft SA
Buchaux 38
CH-2022 Bevaix, NE
Switzerland
To Next Page
Loading...