Chapter 3: Menu reference > Option 7 Service Menu
24 Challenger10 Administrators Manual
Dial management software
Use this option to initiate a communication path’s connection to management
software (dial the path’s phone number 1 and attempt to connect to the remote
service modem). If there is more than one path with “Connect on Service” option
enabled, then the path with the highest priority is automatically selected.
From the Service menu, press [3] [ENTER] to dial management software.
1 Confirm Dial
0-Exit, Menu:
Press [1] [ENTER] to dial phone number 1. Alternatively, press [0] [ENTER] to
cancel.
Dial temporary management software
Use this option to enter a temporary service telephone number and initiate a
communication path’s connection to management software (dial the temporary
service telephone number that you enter, and attempt to connect to the remote
service modem). If there is more than one path with “Connect on Service” option
enabled, then the path with the highest priority is automatically selected.
From the Service menu, press [4] [ENTER] to select dial temporary management
software.
‘*’-Pause, Phone No:
Ser No:
Enter up to 10 digits to program a temporary service telephone number, and then
press [ENTER].
1 Confirm Dial
0-Exit, Menu:
Press [1] [ENTER] to dial the temporary service number. Alternatively, press [0]
[ENTER] to cancel.
Answer management software
Use this option to answer a current dial-in attempt. There can be one or more
communication paths with the “Connect on Service” option enabled. The path
with the highest priority is automatically selected.
Enter [5] and press [ENTER] to answer the call. Challenger connects and exits
the menu.
To Next Page
Loading...
