Chapter 3: Menu reference > Option 20 Door and Floor Groups
42 Challenger10 Administrators Manual
Option 20 Door and Floor Groups
From the User menu prompt (see “Using the keypad” on page 7), press
[2] [0] [ENTER] to program door groups and floor groups.
A door group contains a list of doors and a time zone for each door. A floor group
contains a list of floors and a time zone for each floor. The time zone assigned to
the door group or floor group restricts user access to the times defined in the
time zone. Time zone 0 provides 24-hour access to authorized users.
Groups, 1-Doors 2-Floors
Option:
Press [1] [ENTER] to program a door group, or press [2] [ENTER] to program a
floor group. Alternatively, press [ENTER] to exit this option.
Programming or modifying a door group
We suggest that you record the details of Door Groups on the Door Groups
worksheet (see “Door groups worksheet” on page 51).
From the Door and Floor Groups menu, press [1] [ENTER] to program a door
group.
Door Groups
Group No:
Enter a door group number in the range 1 to 255 and press [ENTER].
The LCD screen displays the door group number, four of the possible 128 doors,
and each door’s assigned time zone (if ‘**’ displays instead of a time zone
number, then the door is disabled). Pressing * when Enter Door: is displayed
scrolls through all 128 doors.
Door Grp 1 D1-** D2-** D3-** D4-**
Enter Door:
For each door in the door group, enter a door number in the range 1 to 128, and
then press [ENTER] to allocate a time zone to the door.
Door Grp 1 D1-01 D2-** D3-** D4-**
*-Dis, Tz-D1:
Enter a time zone number in the range 1 to 63, and then press [ENTER] to return
to the Enter Door prompt.
Alternatively, if you need to disable a door, enter [MENU*] as the time zone and
then press [ENTER] to return to the Enter Door prompt.
To Next Page
Loading...
