TECOM Challenger10 - Option 15 Time & Date

Chapter 3: Menu reference > Option 15 Time & Date
Challenger10 Administrators Manual 37
3. Follow the procedure described in “Create (or modify) user” on page 32,
and enter the enrolment number as the PIN code.
If you want the user to use the card but not the PIN code (enrolment number),
the following options must be programmed:
• The system must be programmed to display user flags when programming
users.
• Set the user flag “card only” to YES when programming the user.
Option 15 Time & Date
From the User menu prompt (see “Using the keypad” on page 7), press
[1] [5] [ENTER] to manage the Challenger panel’s time and date settings (for
example, to program the daylight savings time start and end dates).
Time 1-Display, 2-Set, 3-DST, 4-Correct
0-Exit, Menu:
Display
From the Time & Date menu, press [1] [ENTER]. The LCD screen displays the
panel’s current time and date settings.
Time 14:33:59 05/09/2012 Wednesday
0-Exit
Press the [0] or [ENTER] to return to the Time & Date menu.
Set
From the Time & Date menu, press [2] [ENTER]. The LCD screen displays the
panel’s current time and date settings.
Time 14:33:59 05/09/2012 Wednesday
Hours:
Enter the hours in 24-hour format (or accept the current value), and then press
[ENTER].
Time 14:33:59 05/09/2012 Wednesday
Minutes:
Enter the minutes (or accept the current value), and then press [ENTER].