Chapter 3: Menu reference > Option 15 Time & Date
38 Challenger10 Administrators Manual
Time 14:33:59 05/09/2012 Wednesday
Seconds:
Enter the seconds (or accept the current value), and then press [ENTER].
Time 14:33:59 05/09/2012 Wednesday
Day of Mth:
Enter the day of month (or accept the current value) and press [ENTER].
Time 14:33:59 05/09/2012 Wednesday
Month:
Enter the month (or accept the current value) and press [ENTER].
Time 14:33:59 05/09/2012 Wednesday
Year:
Enter the year (or accept the current value) and press [ENTER].
Time 14:33:59 05/09/2012 Wednesday
Year:
Review the displayed settings and press [ENTER] to save. Alternatively, press [0]
[ENTER] to abandon your changes and exit this option.
DST
From the Time & Date menu, press [3] [ENTER] to program the daylight savings
time start and end dates).
0-Disable, Month 00
Start Sunday:
Enter a value in the range 1 to 5 and press [ENTER] to indicate which Sunday in
the month daylight savings time begins. The following example shows the LCD
screen where a value of 1 is entered.
1-First Sunday, Month 00
Start Sunday:
If correct press [ENTER] to accept, and then to program the start month.
To Next Page
Loading...
