TECOM Challenger10 - Page 51

Chapter 3: Menu reference > Option 20 Door and Floor Groups
Challenger10 Administrators Manual 43
Door Grp 1 D1-01 D2-** D3-** D4-**
Enter Door:
We suggest that each time you program or change a door group, you record the
details on the Door groups worksheet.
Programming or modifying a floor group
We suggest that you record the details of floor groups on the Floor Groups
Worksheet (see “Floor groups worksheet” on page 52).
From the Door and Floor Groups menu, press [2] [ENTER] to program a floor
group.
Floor Groups
Group No:
Enter a floor group number in the range 1 to 128 and press [ENTER].
The LCD screen displays the floor group number, four of the possible 64 floors,
and each floor’s assigned time zone (if ‘**’ displays instead of a time zone
number, then the floor is disabled). Pressing * when Enter Floor: is displayed
scrolls through all 64 floors.
Floor Grp 1 F1-** F2-** F3-** F4-**
Enter Floor:
For each floor in the floor group, enter a floor number in the range 1 to 64, and
then press [ENTER] to allocate a time zone to the floor.
Floor Grp 1 F1-01 F2-** F3-** F4-**
*-Dis, Tz-F1:
Enter a time zone number in the range 1 to 63, and then press [ENTER] to return
to the Enter Floor prompt.
Alternatively, if you need to disable a floor, enter [MENU*] as the time zone and
then press [ENTER] to return to the Enter Floor prompt.
Floor Grp 1 F1-01 F2-** F3-** F4-**
Enter Floor:
We suggest that each time you program or change a floor group, you record the
details on the floor groups worksheet.