TECOM Challenger10 - Page 53

Chapter 3: Menu reference > Option 21 Holidays
Challenger10 Administrators Manual 45
Holiday 1:31/00/00–00/00/00
Start Mth:
Enter a number in the range 1 to 12, and then press [ENTER] to program the
month in which the holiday begins.
Holiday 1:31/12/00–00/00/00
Start Yr:
Enter a number in the range 0 to 99, and then press [ENTER] to program the last
two digits of the year in which the holiday begins.
Defining the end
A holiday can span a range of dates: if so, you need to program the end date. If
the holiday is for only a single date, you can program only the start date, and
then enter zeros for the day, month, and year of the end date.
Holiday 1:31/12/12–00/00/00
End Day:
Enter a number in the range 1 to 31, and then press [ENTER] to program the day
that the holiday ends. Alternatively, enter 0 if this is a one-day holiday.
Holiday 1:31/12/12–02/00/00
End Mth:
Enter a number in the range 1 to 12, and then press [ENTER] to program the
month in which the holiday ends. Alternatively, enter 0 if this is a one-day holiday.
Holiday 1:31/12/12–02/01/00
End Yr:
Enter a number in the range 0 to 99, and then press [ENTER] to program the last
two digits of the year in which the holiday ends. Alternatively, enter 0 if this is a
one-day holiday.
Assigning holiday types
A holiday must be assigned at least one holiday type in order for it to be used.
The holiday type can be linked to a time zone. A holiday without a holiday type is
inactive.
Holiday 1: Hol Types:
Type (1) – (8):
To assign a holiday type to a holiday, enter the holiday type number and then
press [ENTER]. The holiday type number will display in the top line of the LCD
screen.