www.tecsunradios.com.au
PL-660...................................................................................15
When the preset alarm is activated, you can press the
[LIGHT/SNOOZE] button with “ ” or “ ” flashing in order to turn
off the alarm temporarily, but the unit will turn on again after 5
minutes later.
Notes:
1. You can press the [TIMER A] or [TIMER B] button repeatedly to
turn on/off the alarm by radio.
If the symbol shows on the display, it means the
alarm by radio was activated, otherwise, it isn’t activeated.
2. If the preset alarm is activated, press the [POWER] button once to
continuously listen to the radio; press it twice to turn off the radio.
3. If the preset alarm is activated when you are listening to the radio,
it will auto switch to the preset alarm station.
“ ” or “ ”
SNOOZE FUNCTION
A
B
A
B
This radio has an intelligent lighting function with which the backlight
would be on for 3 seconds when operating any keys or knobs.
TURN ON/OFF THE BACKLIGHT:
Press the [LIGHT/SNOOZE] button to illuminate the LCD for 3
seconds; press & hold the [LIGHT/SNOOZE] button for permanently
illumination. Press it again to turn off the backlight.
Notes:
1. When the unit is powered by the battery, please try to avoid
setting the backlight to permanent illumination so as to reduce
power consumption.
2. When the unit is turned off, the permanent illumination function
will be turned off automatically as well.
INTELLIGENT LIGHT FUNCTION