www.tecsunradios.com.au
PL-660...................................................................................19
When receiving AM broadcasting, if there is interference from
adjacent strong signals, you
improve the reception.
1. Press the [SYNC] button to select between “ ” or “ ” for
optimum reception.
2. To deactivate the SYNC function, just press the [SYNC] button
repeatedly with the symbols and dispearing.
Notes:
1. The standard model of receiving AM station is the best normally.
If there is distortion, or interfering within the AM station, please try
to adjacent station signals by activating the Synchronous detection
function, it can improve the reception.
2. If the "SYNC" symbol keeps flashing, it indicates that the radio
signal is too weak or the frequency is deviant. It is recommended
to exit the synchronization detection function as it is not able to
function properly.
can activate the SYNC function to
“ ” “ ”
SYNCHRONOUS DETECTOR
SYNC SYNC
SYNC SYNC
Use the external wire antenna plug into the [FM & SW ANTENNA]
jack, and then hang the other end outside the window for better FM
and SW reception.
HOW TO IMPROVE FM / SW RECEPTION
external antenna for FM & SW
FM & SW ANTENNA
Window wall
Caution: Do not install any external antenna at the area with thunder & lighting!
To Next Page
Loading...
