www.tecsunradios.com.au
METHOD 3: DIRECT KEYPAD ENTRY
1. Press the [VF/VM] button with frequency flashing on the display to
switch into frequency mode.
2. Press the numeric keys [0] - [9] to enter the station frequency
directly.
Notes:
1. Ignore the decimal point for FM band when inputting the
frequency numbers. For example, FM 89.3 MHz, just enter
8 9 3 .
2. If the entered frequency rate is not within the covering area, the
display would display “ ” (error) symbol.
PL-660.....................................................................................7
TUNE IN STATIONS
To Next Page
Loading...
