115-0214-004 3
Solid Construction
Well proven design, the Nova DVR XP is made from Cast
Iron components for strength and rigidity. Added features
like the heavy duty TRIMAX triple bearing system and
special webbed bed design makes the lathe well equipped
to take heavy turning stresses. The bed has been
designed with vibration dampening qualities - a solid 1/2"
cross rib is positioned along the bed unit, quickly
dissipating any vibration as it travels down the bed. The
new powerful trapezoidal bed design delivers even more
vibration damping properties. All this combined with
cosmetically appealing, smooth flowing lines.
Cast iron has always been the material of choice for Woodlathe construction for its inherent mass and an excellent modulus of
vibration.
New 5 Favourite Speeds Function
Pre-program your most favourite speeds for easy retrieval.
New Trapezoidal Bed Design
Powerful with smooth flowing lines, new bed design delivers even more vibration dampening properties.
New Headstock Design
One piece design increases strength and vibration dampening properties. Micro analysed for optimum design. Same popular
swivel headstock as used in the older DVR and 3000 Lathe models, saves strain on your back.
Adaptive Control Software
Smart adaptive computer technology actually measures the weight of the workpiece and adjusts its performance accordingly.
Safety Sensing Feature
Intelligent DVR computer controller senses abnormal turning conditions e.g. a chisel dig in or index left engaged – and
instantaneously shuts down power to the spindle. Normal safety precautions would still apply – see pages 7-8.
Energy Efficient
Unlike other ‘dumb’ electric motors, the Smart DVR Motor only inputs enough power to maintain the set speed – giving you
potential for power savings over conventional motors.
Wide Speed Range
100-3500 rpm, easy push button speed change.
DVR Direct Drive Motor
Driven by unique Direct Drive Variable Reluctance Motor Technology, with superior performance over AC or DC motors. Proven
technology, many thousands of users. No power loss through belts or transmission. Provides digital electronic push button
variable speed with no belt changes.
Ultra Smooth Cutting Power
Selected RPM is closely maintained and the DVR has no belt stretch or motor bounce which affects smooth cutting. The DVR
motor runs smooth with almost no vibration.
Trimax Bearing System
Unique Trimax Bearing System is a triple bearing system to provide a smooth, heavy duty load bearing support for the spindle,
which can easily absorb turning stresses.
5 Year Warranty (limited)
On all castings, mechanical parts and components. 2 Year Warranty on all electronics and electrical components.
Plug and Play
Just bolt to stand or bench, plug it in and you are turning! No complex motor set ups or adjustments.
Low Mantainence
The motor is simple, brushless with no rotor windings (rotor is solid steel). The industrial grade electronics are built to last. There
are no drive pulleys or belts to set up or come loose.
To Next Page
Loading...
