Faceplates:
SFP80L (with side-locking function).
Faceplates are used to mount the work piece
when faceplate turning bowls or platters.
Faceplates are available in 80mm (3")
diameter. A vacuum faceplate is also
available. The 80mm (3") faceplate is made of
solid steel. This faceplate has a small contact
area to allow maximum freedom while
shaping. It comes with 2 notches on the
outside diameter for removing the faceplate
from the spindle. This can be done with a light
drift and mallet.
Vacuum Coupler: 25008
The Vacuum Coupler (not shown) fits onto the
Handwheel Unit. It provides a secure
attachment for your vacuum cleaner hose. For
those turners who are interested in vacuum
chucking, this is a simple system.
Outrigger Unit: OR3000
Extend the bowl turning capacity of the Nova
DVR XP Woodlathe to up to 740mm (29in.) in
diameter. This unit is made from cast iron, is
easy to position and control, and mounts to
the headstock end of the lathe.
Precision Midi Chuck
Ideal for mini, midi and all lathes up to 6”
centre height (12” diameter over bed) Can
also be used for small work on large
lathes.
Supernova 2 Chuck
Designed for the tough demands of
modern woodturning. Body is precision
machined from high quality K1045
machine steel. Gearing is heavy section,
hardened steel to provide a powerful
action. The greater holding strength,
stability, and precision decreases
vibration from small delicate turnings right
up to large bowls and platters work (up to
29”/740mm)
For further details about Teknatool's lathe accessories please contact your local retailer for more information, or
contact us for a free product catalogue. This catalogue can also be downloaded from our website - at
www.teknatool.com
To Next Page
Loading...
