Teknatool NOVA DVR XP - Set the Direction of Rotation

115-0214-004 30
 Pick a preset number you would like to change. IMPORTANT Note: The default speed (#2D) can
not be set at more than 500 rpm and the saved preset speed values will work also after Hard Reset
Function.
 Press the key
SELECTOR
E
in order to make the request for saving the new value of pre-selected speed in
the EEPROM (memory). It will display the symbol ‘?’ at the end of LCD line. Change the speed you
require.
 Press key
PROGRAM
P
to store the new value. There will be the symbol ‘*’ instead the symbol ‘?’.
 Your new setting is now stored.
5.3 Set the direction of rotation (Forward/Reverse function)
 Press
FWD
REV
to set the direction of rotation (Forward/Reverse). Each key pressing will toggle the
direction. In reverse mode the LCD will be:
LCD View
Comments
Set 500rpm=#2D
S
Reference speed and number
Ready to run <<
R
<< - reverse direction