Appendix A: Specifications
370B User Manual
A-19
Table A-16: Certifications and Compliances
Category Standards or description
EC Declaration of Conformity -
EMC
Meets intent of Directive 89/336/EEC, amended by 93/68/EEC;
EN 61326Ć1: 1997 Product Family Standard for Electrical Equipment for Measurement,
Control, and Laboratory UseĆEMC Requirement.
Emissions EN 55011 Class A Radiated and Conducted Emissions
EN 61000Ć3Ć2 Power Line Harmonic
EN 61000Ć3Ć3 Line Voltage Alteration and Flicker
Immunity EN 61000Ć4Ć2 Electrostatic Discharge Immunity
EN 61000Ć4Ć3 Radiated RF Electromagnetic Field Immunity
Note: The output level of Step Generator may vary in this test.
EN 61000Ć4Ć4 Electrical Fast Transient/Burst Immunity
EN 61000Ć4Ć5 Surge Immunity
Note: The output level of collector supply may decrease in this test.
EN 61000Ć4Ć6 Conducted Disturbance induced by RF Field Immunity
EN 61000Ć4Ć8 Power Frequency Electromagnetic Field Immunity
EN 61000Ć4Ć11 Voltage Drop, Short Interruptions and Voltage Variations Immunity
Note: The output of Collector Supply is disabled after this test.
Australia/New Zealand
Declaration of Conformity - EMC
Complies with EMC provision of Radio Communications Act per the following standard:
Industrial, Scientific, and Medical Equipment: 1992
Safety UL3111Ć1
CAN/CSA C22.2 NO. 1010.1
SelfĆDeclaration EN 61010Ć1 with second amendment
Installation Category Power input - Installation Category II (as defined in IEC 61010-1, Annex J)
Pollution Degree Pollution degree 2 (as defined in IEC 61010-1)
To Next Page
Loading...