Operating Basics
2-18
370B User Manual
ration control is set to BASE COMMON, pressing INVERT does not effect the
actual Step Generator polarity, and the polarity indicator does not change; only
the INVERT indicator changes.
Table 2–3 shows the Step Generator Polarity in relation to the Collector Supply
Polarity, Configuration mode and INVERT button. For example, if the mode is
EMITTER COMMON and the POLARITY is +
, +DC, or +LEAKAGE, the
INVERT button controls the Step Generator Polarity.
Table 2-3: Step Generator Polarity
COLLECTOR SUPPLY
setting
CONFIGURATION mode setting
To Next Page
Loading...
General