Operating Basics
370B User Manual
2-3
The DOT cursor intensity is always proportional to NON STORE/STORE/
VIEW intensity. The READOUT/CURSOR intensity control has no effect on
DOT cursor intensity.
NON STORE/ STORE VIEW controls NON STORE, STORE or VIEW curve
display brightness.
REF controls REF curve display brightness.
READOUT/CURSOR controls readout, f LINE cursor, and Window cursor
display brightness.
FOCUS. The FOCUS knob controls the display focus.
GRAT ILLUM. The GRAT ILLUM knob controls the internal
graticule illumination.
POSITION. The POSITION control is adjusted with a screwdriver to position the
vertical and horizontal display. These adjustments do not affect the acquired
curve data accuracy.
TRACE ROTATION.The TRACE ROTATION is adjusted with a screwdriver to
adjust the horizontal trace alignment. It is not necessary to make this adjustment
a second time during normal operation.
To Next Page
Loading...
General