Commands Listed in Alphabetical Order
Group
Waveform Trans
fer
Syntax
WFMInpre:BIT_Nr?
Related Commands
WFMInpre:BYT_Nr?
Examples
WFMINPRE:BIT_NR? might return WFMINPRE:BIT_N R 32, indicating that there
are 32 bits per waveform point.
WFMInpre:BN_Fmt
This command sets or queries the format of the binary or ascii data encoding of
the waveform to be transferred to the instrument.
Group
Waveform Transfer
Syntax
WFMInpre:BN_Fmt {RI | FP}
WFMInpre:BN_Fmt?
Related Commands
DATa:ENCdg, WFMInpre:BYT_Or, WFMInpre:ENCdg
Arguments
RI specifies signed integer data-point representation.
FP specifies floating-point data-point representation.
Examples
WFMINPRE:BN_FMT RI specifies that the binary or ascii waveform data values
are signed integer data points.
WFMINPRE:BN_FMT? might return WFMPRE:BN_FMT FP, indicating that the
waveform data format for transferring a waveform is floating point.
WFMInpre:BYT_Nr? (Query Only)
This query only command returns the byte width of the waveform to be transferred
to the instrument.
NOTE. This instrument supports only a 4-byte width format.
Group
Waveform Transfer
DSA/CSA/TDS8X00/B Series Programmer Manual 2-355
To Next Page
Loading...
Need help?
General
