Tektronix DSA8200 Series User Manual

Commands Listed in Alphabetical Order
Returns
NR1 is the curre
nt count value of mask samples accumulated for mask testing.
Examples
ACQUIRE:CURRENTCOUNT:MASK SAMPLES? might return
ACQUIRE:CURRENTCOUNT:MASK SAMPLES 75, indicating that
currently 75 mask samples have been acquired for mask testing.
ACQuire:CURRentcount:MASKTHits? (Query Only)
This query only command returns the current total count v alue of mask hits. The
target value of this c ount is set by the ACQuire:STOPAfter:COUNt command
(in conjunction with the ACQuire:STOPAfter:CONDition command). The
instrument then counts up to this value. When the count reaches (or exceeds) this
value, acquisition stops, and the specified StopAfter action is performed.
Group
Acquisition
Syntax
ACQuire:CURRentcount:MASK THits?
Related Commands
ACQuire:STOPAfter:COUNt, ACQuire:STOPAfter:CONDition
Returns
NR1 is the current count value of mask hits.
Examples
ACQUIRE:CURRENTCOUNT:MASK THITS? might return
ACQUIRE:CURRENTCOUNT:MASK THITS 300, indicating that currently 300 mask
hits have been acquired.
ACQuire:CURRentcount:MASKWfms? (Query Only)
This query only command returns the current count value of mask waveforms.
The target value of this count is set by the ACQuire:STOPAfter:COUNt command
(in conjunction with the ACQuire:STOPAfter:CONDition command). The
instrument then counts up to this value. When the count reaches (or exceeds) this
value, acquisition stops, and the specified StopAfter action is performed.
Group
Acquisition
Syntax
ACQuire:CURRentcount:MASK Wfms?
2-54 DSA/CSA/TDS8X00/B Series Programmer Manual

Tektronix DSA8200 Series Specifications

General

Brand	Tektronix
Model	DSA8200 Series
Category	Test Equipment
Language	English