Tektronix MDO3024 User Manual

Save and Recall I
nformation
3. Turn the Multip
urpose a knob and, on
the side menu, select one of the displayed
waveforms or traces. Alternatively, select
All Displayed
Waveforms.
When saving RF trace data, you can select
to save it as either the standard display data
or as baseban
d I and Q data (.TIQ files).
Use the I and Q data with Tektronix SignalVu
Vector Signal Analysis software.
4. Turn the Mul
tipurpose b knob and select
the location to save the waveform or trace
data to or to recall it from.
Save the inf
ormation externally to a file on
a USB drive or mounted network drive.
Alternatively, save the information internally
to one of th
e four or two reference files.
166 MDO3000 Series Oscilloscopes User Manual

Tektronix MDO3024 Specifications

General

Analog Channels	4
Bandwidth	200 MHz
Sample Rate	2.5 GS/s
Record Length	10 Mpoints
Digital Channels	16 (optional)
Spectrum Analyzer Frequency Range	9 kHz to 3 GHz
Digital Voltmeter	4-digit
Vertical Resolution	8 bits
Operating Temperature	0 °C to +50 °C
Display	9-inch WVGA (800x480) color display
Connectivity	USB, LAN, GPIB (optional)
Arbitrary Function Generator	50 MHz
Trigger Modes	Edge, Pulse Width, Logic, Video, Runt, Rise/Fall Time, Setup/Hold
Input Impedance	1 MΩ ±1%
Max Input Voltage	300 VRMS
Trigger Types	Edge, Pulse Width, Logic, Video, Runt, Rise/Fall Time, Setup/Hold