Tektronix MDO3024 User Manual

Installation
Changing the Date and Time
To set the internal clock with the current date and time:
1. Push Utility.
2. Push Utilit
y Page.
Utility
Page
3. Turn Multipurpose a and select Config.
Config
4. Push Set
Date & Time.
Utility
Page
Config
Language
Set Date &
Time
About Manage
Modules &
Options
5. Push th
e side menu buttons and turn both
the (Multip urpose a and Multipurpose b)
knobs to set the time and date values.
Displa
y
Date &
Time
On|Of
f
Hour
4
Minut
e
44
Month
May
Day
3
Year
2011
6. Push
OK Set Date & Time.
OK Set
Date &
Time
20 MDO3000 Series Oscilloscopes User Manual

Tektronix MDO3024 Specifications

General

Analog Channels	4
Bandwidth	200 MHz
Sample Rate	2.5 GS/s
Record Length	10 Mpoints
Digital Channels	16 (optional)
Spectrum Analyzer Frequency Range	9 kHz to 3 GHz
Digital Voltmeter	4-digit
Vertical Resolution	8 bits
Operating Temperature	0 °C to +50 °C
Display	9-inch WVGA (800x480) color display
Connectivity	USB, LAN, GPIB (optional)
Arbitrary Function Generator	50 MHz
Trigger Modes	Edge, Pulse Width, Logic, Video, Runt, Rise/Fall Time, Setup/Hold
Input Impedance	1 MΩ ±1%
Max Input Voltage	300 VRMS
Trigger Types	Edge, Pulse Width, Logic, Video, Runt, Rise/Fall Time, Setup/Hold