Tektronix MDO3024 User Manual

Use the Arbitrar
y Function G enerator
7. Push the lower-
menu button labeled Load
Waveform.TurnMultip urpose a to choose
which of your waveforms to display. Also,
you can use the
side menu to load a saved
waveform from a file. When you have chosen
the desired waveform, push OK Load from
thesidemenu
. Clear the menu by pushing
Menu Off twice.
Be sure that you have a BNC cable
connected fr
om the AUX OUT port on the
back to the channel 1 port on the front.
View your ar
bitrary waveform on the
oscilloscope display.
8. On the lower menu, push Save Waveform.
Turn Multipurpo se a to select which of
the four slots to store your newly created
waveform. Push OK Save. If you want, push
Edit Labels and use Multipurpose a and
the lower menu to assign a name to your new
waveform. Clear the label menu by pushing
Menu off.
MDO3000 Series Oscilloscopes User Manual 189

Tektronix MDO3024 Specifications

General

Analog Channels	4
Bandwidth	200 MHz
Sample Rate	2.5 GS/s
Record Length	10 Mpoints
Digital Channels	16 (optional)
Spectrum Analyzer Frequency Range	9 kHz to 3 GHz
Digital Voltmeter	4-digit
Vertical Resolution	8 bits
Operating Temperature	0 °C to +50 °C
Display	9-inch WVGA (800x480) color display
Connectivity	USB, LAN, GPIB (optional)
Arbitrary Function Generator	50 MHz
Trigger Modes	Edge, Pulse Width, Logic, Video, Runt, Rise/Fall Time, Setup/Hold
Input Impedance	1 MΩ ±1%
Max Input Voltage	300 VRMS
Trigger Types	Edge, Pulse Width, Logic, Video, Runt, Rise/Fall Time, Setup/Hold