Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Group
Zoom
Syntax
ZOOm:ZOOM<x>:POSition <NR3>
ZOOm:ZOOM<x>:POSition?
Arguments
<NR3> is a floating point number that specifies the horizontal position as a percent
of the upper window.
ZOOm:ZOOM<x>:SCAle
This command specifies the horizontal scale of the zoom box. <x> can only be 1.
Group
Zoom
Syntax
ZOOm:ZOOM<x>:SCAle <NR3>
ZOOm:ZOOM<x>:SCAle?
Arguments
<NR3> is a floating point number that specifies the horizontal scale of the zoom
box.
ZOOm:ZOOM<x>:STATE
This command turns the specified zoom on or off. <x> can only be 1.
Group
Zoom
Syntax
ZOOm:ZOOM<x>:STATE {ON|OFF|<NR1>}
ZOOm:ZOOM<x>:STATE?
Arguments
ON turns Zoom 1 on.
OFF turns Zoom 1 off.
<NR1> is an integer. 0 disables the specified zoom; any other value enables the
specified zoom.
Examples
ZOOM:ZOOM1:STATE ON turns Zoom1 on.
ZOOM:ZOOM1:STATE? might return :ZOOM: ZOOM1:STATE 1 indicating that
Zoom1 is on.
2-976 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO4000B Series Specifications

General

Bandwidth	100 MHz to 1 GHz
Form Factor	Benchtop
Vertical Resolution	8 bits
Input Coupling	AC, DC, GND
Timebase Accuracy	± 1 ppm
Operating Temperature	0 °C to +50 °C
Built-in Spectrum Analyzer	Yes
Channels	up to 4 analog channels
Record Length	up to 20 Mpoints
Display	10.4 inch (264 mm) color TFT LCD
Connectivity	USB, LAN, GPIB (optional)
RF Capture Bandwidth	Up to 1 GHz
Arbitrary/Function Generator	optional
Input Impedance	1 MΩ || 13 pF
Trigger Types	Edge, Pulse Width
Protocol Analysis	I2C, SPI, CAN, LIN, RS-232/422/485/UART, USB 2.0, Ethernet, FlexRay, MIL-STD-1553