Tektronix MDO4000B Series

Appendix H: List of Beta Commands and Features
Examples:
AFG:MODULatio
n:AM:DEPth
10.0 sets the modulation depth to 10%.
AFG:MODULation:AM:FREQuency
Description:
Sets the modulation frequency to use for Amplitude Modulation for the AFG.
Conditions:
Beta Command, see conditions of use. Default setting is 10.0E+3.
Group:
AFG
Syntax:
AFG:MODULation:AM:FREQuency <NR3>
AFG:MODULation:AM:FREQuency?
Arguments:
<NR3> - Frequency value for modulation in Hz from 200.0E-3 to 50.0E+3 with a
resolution of 100.0E-3.
Example
s:
AFG:MODULation:AM:FREQuency 10.0E+3 sets the modulation frequency to
10kHz.
AFG:MODULation:AM:WAVeform
Description:
Sets the modulation shape to use for Amplitude Modulation for the AFG.
Conditions:
Beta Command, see conditions of use. Default setting is SINE.
Group:
AFG
Syntax:
AFG:MODULation:AM:WAVeform
{SINE|SQUare|TRIangle|RAMP|NRAMP|NOISe }
AFG:MODULation:AM:WAVeform?
Arguments:
SINE -Sinewaveform
SQUare - Square waveform
TRIangle - Triangle waveform
RAMP - Positive ramp waveform
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual H-3