Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Examples
AFG:ARB:EMEM:
FUNC?
might return SINE, indicating that the currently selected
arbitrary waveform function is Sine.
AFG:ARBitrary:EMEM:GENerate (No Query Form)
This command generates the arbitrary waveform function specified by the
enumeration argument.
The NR1 argument is optional; it canbeusedtospecifythenumber
of points; if it is used, it also sets the value that will be used by
AFG:ARBitrary:EMEM:NUMPoints? until the instrument is reset via
TEKSecur
e.
In the absence of the NR1 argument, the number of points used with the function
is that n
umber returned by the AFG:ARBitrary:EMEM:NUMPoints? query.
To query the arbitrary waveform function set by this command, use
AFG:AR
Bitrary:EMEM:FUNCtion?
(This value is not reset by default setup or by power cycle).
Conditions
MDO3000 series with option MDO3AFG installed and MDO4000C series with
option MDO4AFG installed only.
Group
ARB
Syntax
AFG:ARBitrary:EMEM:GENerate
{SINE|SQUare|PULSe|RAMP|NOISe[,NR1]}
AFG:ARBitrary:EMEM:GENerate?
Arguments
<NR1> (Optional) Specifies the number of points for the arbitrary waveform
function. The number of points, if specified, must be >= 2 and <= 131072. The
default number of points is 100.
SINE generates the Sine AFG function.
SQUare generates the Square AFG function.
PULSe generates the Pulse AFG function.
RAMP generates the Ramp AFG function.
NOISe generates the Noise AFG function.
Examples
AFG:ARB:EMEM:GEN SQU will generate a 100 point square wave if the previous
setting of
AFG:ARB:EMEM:NUMP is 100.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-127

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English