Commands Listed in Alphabetical Order
ALIas:DELEte
[:NAMe] (No Query Form)
Removesaspecifiedalias.
Group
Alias
Syntax
ALIas:DELEte[:NAMe] <QString>
Arguments
<QString> is the name of the alias to remove. Using ALIas:DELEte[: NAMe]
without specifying an alias causes an execution error. < QString> must be an
existing alias.
Examples
ALIAS:DELETE[:NAME] “STARTUP” deletes the alias named STARTUP.
ALIas[:STATE]
Turns aliases on or off. (See page 2-13, Alias Command Group.)
Group
Alias
Syntax
ALIas[:STATE] {<NR1>|OFF|ON}
ALIas[:STATE]?
Arguments
OFF or <NR1> = 0 turns alias expansion off. If a defined alias is sent when
ALIas:STATE is OFF, a command error (102) is generated.
ON or <NR1> 0 turns alias expansion on. When a defined alias is received, the
specified command sequence is substituted for the alias and executed.
Examples
ALIAS[:STATE] OFF turns the command alias feature off.
ALIAS[:STATE]? returns 0 when the alias feature is off.
ALLEv? (Query Only)
Prompts the oscilloscope to return all events and their messages (delimited by
commas), and removes the
returned events from the Event Queue. Use the *ESR?
query to enable the events to be returned. This command is similar to repeatedly
sending *EVMsg? queries to the oscilloscope.
2-144 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
