Tektronix MDO4000B Series

Commands Listed in Alphabetical Order
CONFIGuratio
n:APPLications:CUSTOMMask? (Query Only)
Indicates whether the Custom Mask test feature is present and enabled.
Conditions
Requires installation of a DPO4LMT application module, or an MDO3LMT
for MDO3000 models.
Group
Configuration
Syntax
CONFIGuration:APPLications:CUSTOMMask?
Returns
1 indicates that the Custom Mask test feature is present and enabled.
0 indicates that either the Custom Mask test feature is not present, or it is not
enabled.
Examples
CONFIG:APPL:CUSTOMM? might return 1, indicating that the feature is present
and enabled.
CONFIGuration:APPLications:LIMITMask? (Query Only)
This query returns a boolean value to indicate whether the optional mask/limit
test feature is present.
Conditions
Requires installation of a DPO4LMT application module, or MDO3LMT for
MDO3000 models)
Group
Configuration
Syntax
CONFIGuration:APPLications:LIMITMask?
Related Commands
(See page 2-31, Mask Command Group.)
Returns
1 indicates the mask/limit test feature is present.
0 indicates the mask/limit test feature is not present.
2-240 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual