Commands Listed in Alphabetical Order
Syntax
CONFIGuration
:RF:NUMCHANnels?
Related Commands
(See page 2-47, RF Command Group .)
Returns
<NR1>
CONFIGuration:ROSC? (Query Only)
This query returns a boolean value to indicate whether the instrument has an
external reference oscillator (ROSC) input.
Group
Configuration
Syntax
CONFIGuration:ROSC?
Returns
<NR1> = 1 if a ROSC input is present.
<NR1> = 0 if a ROSC input is not present.
CURSor?
Returns all of the current cursor settings.
Group
Cursor
Syntax
CURSor?
Examples
CURSOR? might return the following as the current cursor settings:
:CURSOR:FUNCTION SCREEN;HBARS:POSITION1 0.0000;POSITI
ON2
0.0000;UNITS BASE;:CURSOR:MODE INDEPENDENT;VBARS:POSITION1
-19.0006E-6;POSITION2 -18.9994E-6;UNITS SECONDS
CURSor:DDT? (Query Only)
Returns the cursor deltaY/deltaT (dY/dT) readout.
Conditions
This command requires a DPO4PWR application m
odule.
2-256 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
