Commands Listed in Alphabetical Order
Examples
DISPLAY:PERSI
STENCE 3
specifies that the waveform points are displayed
fading for 3 seconds before they completely disappear.
DISplay:STYle:DOTsonly
This command turns on or off the dots-only mode for the waveforms displayed in
the time domain.
Group
Display
Syntax
DISplay:STYle:DOTsonly {ON|OFF|<NR1>}
DISplay:STYle:DOTsonly?
Arguments
ON or <NR1> ≠ 0 turns on the dots-only display.
OFF or <N R1> = 0 turns off the dots-only display.
DISplay:TRIGFrequency
This command switches the trigger frequency readout on or off.
Group
Display
Syntax
DISplay:TRIGFrequency {OFF|ON|0|1}
DISplay:TRIGFrequency?
Related Commands
TRIGger:FREQuency?
Examples
DISplay:TRIGFrequency ON turns the trigger frequency read out on.
DISplay:TRIGFrequency? might return 0, indicating that the trigger frequency
readout is turned off.
DISplay:XY
This command turns on or off the XY display mode.
Group
Display
2-294 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
