Commands Listed in Alphabetical Order
Group
Email
Syntax
EMAIL:SETUp:SMTPPort <NR1>
EMAIL:SETUp:SMTPPort?
Arguments
Integer that represents the email SMTP server port number.
Examples
EMAIL:SETUP:SMTPPORT 19 sets the email SMTP server port number to 19.
EMAIL:SETUp:SMTPServer
Sets or returns the email SMTP server DNS name for the common server setup
information that is shared between the Act on Event commands and the Hardcopy
Email commands.
Group
Email
Syntax
EMAIL:SETUp:SMTPServer <QString>
EMAIL:SETUp:SMTPServer?
Arguments
Integer that represents the email SMTP server DNS name.
Examples
EMAIL:SETUP:SMTPSERVER“SMTP1.mail.com” sets the email SMTP server to
SMTP1.mail.com.
ETHERnet:DHCPbootp
This command specifies the network initialization search for a DHCP/BOOTP
server.
Group
Ethernet
Syntax
ETHERnet:DHCPbootp {ON|OFF}
ETHERnet:DHCPbootp?
Arguments
ON enables the oscilloscope to search the network for a DHCP or BOOTP server
in order to automatically assign a dynamic IP address to the oscilloscope.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-307
To Next Page
Loading...
