To Next Page

To Previous Page

Commands Listed in Alphabetical Order

Aseriesofexam

ples showing how to use mask commands for typical tasks

is included in an appendix. (See page E-1, Mask/Limit Command Sequence

Examples.)

Conditions

This command requires a DPO4LMT application module for 4000 series models,

and an MDO3LMT application module for MDO3000 series models.

Group

Mask

Syntax

MASK:DISplay {ON|OFF|1|0}

MASK:DISplay?

Related Commands

MASK:TEMPLate:CREATEmask

Arguments

ON shows the mask on the display. This is the default value.

OFF removes the mask from the display.

0 removes the mask from the display;

1 shows the mask on the display.

Examples

MASK:DISplay ON shows the mask on the display.

MASK:DISplay? might return 0, indicating that the mask is not being shown

on the display.

MASK:LOCk

This command locks the mask to the source waveform so that any changes made

to the horizontal and/or vertical scale settings of the waveform will redraw the

mask segments in proportion. This feature is useful for expanding the horizontal

and/or vertical settings in order to zoom in on waveforms and masks, and visually

examine violation areas in more detail.

A series of examples showing how to use mask commands for t

ypical tasks