Commands Listed in Alphabetical Order
TOVershoot (to
tal overshoot) (MDO models only) measures the sum of the
positive and negative overshoot value over the entire waveform or gated region.
This measurement is applicable only to the analog channels.
WAVEFORMS (waveform count) measures the number of waveforms used to
calculate the histogram.
Examples
MEASUREMENT:IMMED:TYPE FREQUENCY defines the immediate measurement to
be a frequency measurement.
MEASUREMENT:IMMED:TYPE? might return :MEASUREMENT:IMMED:TYPe RMS
indicating that the immediate measurement is the true Root Mean Square voltage.
MEASUrement:IMMed:UNIts? (Query Only)
Returns a string containing the units of the immediate measurement.
Group
Measurement
Syntax
MEASUrement:IMMed:UNIts?
Returns
This query returns one of the following strings.
Unit string Description
"%"
percent
"/Hz"
inverse hertz
"?"
indeterminate
"A"
amperes
"A/A"
amperes per ampere
"A/V"
amperes per volt
"A/W"
ampere per watt
"A/dB"
amperes per decibel
"A/s"
amperes per second
"AA" amperes squared
"AW"
ampere-watts
"AdB" ampere-decibels
"As" ampere-seconds
"B" bytes
"Hz" hertz
"IRE"
Institute of Radio Engineers units
"S/s"
samples per second
2-428 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
