Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Examples
POWER:MODULAT
ION:TYPE NWIDTH
sets the modulation type to Negative Width.
POWER:MODULATION:TYPE? might return : POWER:MODULATION:TYPE PWI
indicating that the modulation type is set to Positive Width.
POWer:QUALity:APPpwr? (Query Only)
Returns the apparent power measurement.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:QUALity:APPpwr?
Examples
POWER:QUALITY:APPPWR? might return :POWER:QUALITY:APPpwr 100
indicating that the apparent power value is set to 100 VA.
POWer:QUALity:DISplay:APPpwr
This command specifies the display state for the apparent power readout.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:QUALity:DISplay:APPpwr {OFF|ON|0|1}
POWer:QUALity:DISplay:APPpwr?
Arguments
OFF or 0 turns off the apparent power display.
ON or 1 turns on the apparent power display.
Examples
POWER:QUALITY:DISPLAY:APPPWR 1 t
urns on the apparent power display.
POWER:QUALITY:DISPLAY:APPPWR? might return
:POWER:QUALITY:DISPLAY:APPPWR 0 indicating that the apparent power
display is off.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-489

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English