Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Examples
POWER:REFLEVE
L:ABSOLUTE:HIGH 2
sets the absolute high value to 2.000.
POWER:REFLEVEL:ABSOLUTE:HIGH? might return
POWER:REFLEV
EL:ABSOLUTE:HIGH 2
indicating that the absolute high
valueissetto2V.
POWer:REFLevel:ABSolute:LOW
This comman
d specifies the low reference level to be used for power
measurements.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:REFLevel:ABSolute:LOW <NR3>; Ranges={D,-1e6,+1E6}
POWer:REFLevel:ABSolute:LOW?
Arguments
<NR3> is a floating point numb
er that specifies the absolute low value in volts.
Default value is 0.0E+0.
Examples
POWER:REFLEVEL:ABSOLUTE:LOW 1.0 sets the absolute high value to 1.0000.
POWER:REFLEVEL:ABSOLUTE:LOW? might return
POWER:REFLEVEL:ABSOLUTE:LOW 1.0000 indicating that the absolute low
valueissetto1V.
POWer:REFLevel:ABSolute:MID<x>
This command specifies the mid reference level to be used for power
measurements. MID1 is used on the user’s voltage waveform. MID2 is used on
the user’s current waveform. MID3 is used on the user’s gate waveform. (MID3
is specific to the power application.)
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
2-500 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English