Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
POWer:SWLoss
:TON:ENERGY:MAX? (Query Only)
Returns the maximum Ton energy for the switching loss calculation.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:SWLoss:TON:ENERGY:MAX?
Examples
POWER:SWLOSS:TON:ENERGY:MAX? might return
:POWER:SWLOSS:TON:ENERGY:MAX 1 indicating that the maximum Ton energy
switch
ing loss calculation is set to 1 J.
POWer:SWLoss:TO N:ENERGY:MEAN? (Query Only)
Returns the mean Ton energy for the switching loss calculation.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:SWLoss:TON:ENERGY:MEAN?
Examples
POWER:SWLOSS:TON:ENERGY:MEAN? might return
:POWER:SWLOSS:TON:ENERGY:MEAN 1 indicating that the mean Ton energy
switching loss calculation is set to 1 J.
POWer:SWLoss:TO N:ENERGY:MIN? (Query Only)
Returns the minimum Ton energy for the switching loss calculation.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
2-530 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English