Tektronix MDO4000B Series

Commands Listed in Alphabetical Order
POWer:SWLoss
:TON:POWer:MIN? (Query O nly)
Returns the minimum Ton power for the switching loss calculation.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:SWLoss:TON:POWer:MIN?
Examples
POWER:SWLOSS:TON:POWER:MIN? might return
:POWER:SWLOSS:TON:POWER:MIN 1 indicating that the minimum Ton power
switch
ing loss calculation is set to 1 W.
POWer:SWLoss:TO Tal:ENERGY:MAX? (Query Only)
Returns the maximum total energy for the switching loss calculation.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
Syntax
POWer:SWLoss:TOTal:ENERGY:MAX?
Examples
POWER:SWLOSS:TOTAL:ENERGY:MAX? might return
:POWER:SWLOSS:TOTAL:ENERGY:MAX 1 indicating that the maximum
conduction energy switching loss calculation is set to 1 J.
POWer:SWLoss:TO Tal:ENERGY:MEAN? (Query Only)
Returns the mean total energy for the switching loss calculation.
Conditions
This command requires a DPO4PWR application module for 4000 series models,
or an MDO3PWR application module for MDO3000 series models.
Group
Power
2-532 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual