Tektronix MDO4000B Series - Page 700

Commands Listed in Alphabetical Order
Related Commands
SEARCH:SEARCH
<x>:TRIGger:A:BUS:B<x>:LIN:CONDition
Arguments
<QString> is the binary data string for the search.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:LIN:DATA:VALUE? might
return SEARCH:SEARCH1:TRIGGER:A:BUS:B1:LIN:DATA:VALUE
"XXXXXXXX" indicating the data value is don't care.
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LIN:ERRTYPE
This command specifies the error type used for a LIN search.SEARCH<x> is the
search number, which is always 1, and
B<x>
Conditions
This command requires a DPO4AUTO application module for DPO/MSO4000B
and MDO4000/B/C models or MDO3AUTO application module for
MDO3000 models.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LI N:ERRTYPE
{SYNC|PARity|CHecksum|HEADertime|RESPt ime|FRAMetime}
SEARCH:SEARCH<x>:TRIGger:A:BUS:B<x>:LI N:ERRTYPE?
Arguments
SYNC specifies a sync error type.
PARity specifies a parity error type.
CHecksum specifi
es a checksum error type.
HEADertime specifies a header time error type.
RESPtime specifies a response time error type.
RAMetime specifies a frame time error type.
Examples
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:LIN:ER RTYPE? might return
SEARCH:SEARCH1:TRIGGER:A:BUS:B1:LIN:ER RTYPE SYNC indicating a
SYNC error type.
2-670 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual