Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
SEARCH:SEARC
H<x>:TRIGger:A:UPPerthreshold:RF_FREQuency
For a runt or transition search using the RF Frequency vs. Time
trace, this command specifies the upper threshold to be used by the
search engin
e. (To specify the lower threshold, use the command
SEARCH:SEARCH<x>:TRIGger:A:LOWerthreshold:RF_AMPlitude.)
Conditions
MDO4000/B/C models only.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:UPPerthresh old:RF_FREQuency
{<NR3>}
SEARCH:SEARCH<x>:TRIGger:A:UPPerthresh old:RF_FREQuency?
Related Commands
TRIGger:A:UPPerthreshold:RF
Arguments
<NR3> is a floating point number that specifies the threshold for the time domain
trace, in Hz.
Examples
SEARCH:SEARCH1:TRIGger:A:UPPerthreshol d:RF_FREQuency
100.0E+6
sets the upper threshold to 100 MHz.
SEARCH:SEARCH1:TRIGger:A:UPPerthreshol d:RF_FREQuency? might
return 100.0E+6, indicating that the upper threshold has been set to 100 MHz.
SEARCH:SEARCH<x>:TRIGger:A:UPPerthreshold:RF_PHASe
This command specifie
s the upper threshold to be used by the search engine when
performing a runt or transition search using the RF Phase vs. Time trace.
(To specify the lowe
r threshold, use the command SEARCH:SEARCH<x>:
TRIGger:A:LOWerthreshold:RF_AMPlitude.)
Conditions
MDO4000/B/C models only.
Group
Search
Syntax
SEARCH:SEARCH<x>:TRIGger:A:UPPerthresh old:RF_PHASe {<NR3>}
SEARCH:SEARCH<x>:TRIGg
er:A:UPPerthreshold:RF_PHASe?
2-752 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English