Commands Listed in Alphabetical Order
X sets the value
to X (“don’t care”) which is the default.
ZERO sets the value to 0.
ONE sets the value to 1.
NOCARE sets the value to X (“don’t care”) which is the default.
OFF sets the value to 0.
ON sets the value to 1.
Examples
TRIGger:A:BUS:B1:MIL1553B:STAT:BIT:INS TR ZERo sets the status word
instrumentation bit value to be used in the trigger to 0.
TRIGger:A:BUS:B1:MIL1553B:STAT:BIT:INS TR? might return 1.
TRIGger:A:BUS:B<x>:MIL1553B:STATus:BIT:ME
When the MIL-STD-1553 bus trigger condition is set to STATus, this command
specifies the status word message error bit value (bit 9) to be used in the trigger.
Returned values are 0, 1, or X (don’t care, which is the default).
B<x>
Conditions
This command requires a DPO4AERO application module for DPO/MSO4000B
and MDO4000/B/C models or MDO3AERO application module for
MDO3000 models.
Group
Trigger
Syntax
TRIGger:A:BUS:B<x>:MIL1553B:STATus:BIT :ME
{0|1|X|ZERo|ONE|NOCARE|OFF|ON}
TRIGger:A:BUS:B<x>:MIL1553B:STATus:BIT :ME?
Related Commands
TRIGger:A:BUS:B<x>:MIL1553B:CONDition
Arguments
0
1
X
sets the value to X (“don’t care”) which is the default.
ZERO sets the value to 0.
ONE sets the value to 1.
NOCARE sets the value to X (“don’t care”) which is the default.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-847
To Next Page
Loading...
Need help?
General
