EasyManua.ls Logo

Tektronix MSO5104B

Tektronix MSO5104B
920 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Opt. SR-810B - 8b/10b Serial Triggering and Analysis
Opt. ST6G - Serial Protocol Trigger Software to trigger and decode 8 B/10 B data on high-speed serial or data protocols.
Protocol triggering up to 6.25 GS/s. (standard on MSO instruments)
Opt. SVA - AM/FM/PM Audio Signal Analysis (Requires Opt. SVE)
Opt. SVE - SignalVu Essentials for Vector Signal Analysis
Opt. SVM - SignalVu Essentials for General Purpose Modulation Analysis (requires option SVE)
Opt. SVO - Flexible OFDM Analysis (requires SVE)
Opt. SVP - SignalVu Pulse — Advance Signal Analysis Software (requires SVE)
Opt. SVT - Settling Time Measurements such as Frequency and Phase (requires SVE)
Opt. TBT-TX - Thunderbolt Transmitter Characterization, Debug, and Compliance Testing (Requires Opt. DJA and Opt. 2XL
or higher) (For models of bandwidth ≥16 GHz only)
Opt. UHS2 - UHS-II-Host-Tx and UHS-ii-Device-Tx Measurements (For models of bandwidth ≥6 GHz only)
Opt. USB - Universal Serial Bus USB 2.0 Compliance Test
Opt. USBHSIC - USB2.0 and HSIC Bundle, includes options Opt. DJA, HSIC, SR-USB, and USB
Opt. USBPWR - USB Power Adapter/ EPS Compliance Automated Test Solution (Not supported on 70000DX models)
Opt. USB3 - Universal Serial Bus USB 3.0 Compliance and Analysis
Opt. VET - Visual Trigger and Search
Opt. 10G-KR - 10GBASE-KR/KR4 Compliance and Debug Solution (Requires Opt. DJA) (For models of bandwidth
≥16 GHz only)
DPO70000SX Series
Calibration:
Opt. C3 - Calibration service 3 years
Opt. C5 - Calibration service 5 years
Opt. D1 - Calibration data report
Opt. D3 - Calibration data report 3 years (with Opt C3)
Opt. D5 - Calibration data report 5 years (with Opt C5)
Hardware:
Opt. SSD Additional Removable Disk - Solid State Drive
Record Length:
DPO70000SX Series:
Opt. 10XL - 125 MSamples/ch
Opt. 20XL - 250 MSamples/ch
Opt. 50XL - 500 MSamples/ch, 1 G/Ch on 2 channels
Service:
Opt. CA1 - Provides single calibration event for the designated interval
Opt. G3 Complete Care 3 Years (includes loaner, scheduled calibration, and more)
About Tektronix oscilloscopes
14 DPO70000SX, MSO/DPO70000DX, MSO/DPO70000C, DPO7000C, and MSO/DPO5000B Series

Table of Contents

Other manuals for Tektronix MSO5104B

Related product manuals